'Other' Constructional and Allied Systems Info & Downloads
'Polylong' Type Sets
Polylong was a Meccano-like construction system similar to Eitech Construction. It was made in China from around 2003 to 2010. For details see the Polylong[1] page.
Shortly afterwards one or more other Chinese manufacturers also started making very similar Eitech look-alike sets. These were usually made for companies in other countries throughout the world who would then sell them under their own names/brands. Because of their similarity to the original Polylong these have been classified as 'Polylong' Type Sets.
There are two types of 'Polylong' Type Sets:-
Polylong[1a] - These have 10mm hole spacing and many/most of the parts are identical to Eitech Construction parts.
Polylong[2] - These have the same design of parts as Polylong[1a], but scaled up to a 11mm hole pitch. Seen in some Happy People sets, and possibly others.
Some sets have been seen that have a mixture of Polylong[1a] parts together with some 'Meccano-like' parts with standard 12.7mm (1/2") hole spacing.
For a list of most of the known 'Polylong' Type Sets see here.
Some of the 'Polylong' Type Sets have photos/manuals on this website under their own names. To find them all, use the search facility for Polylong sets at the top of this page
Polylong[1a]
Manufacturer / Distributor
Unknown Chinese company
rcee GmbH, Germany
Info from the Metal Constructional Systems Database for POLYLONG [1a] (Ref:PLY1a)
as EITECH/CONSTRUCTION
China
2004 to in production in 2022 and continuing
Steel
M4
push fit
----
25 (see comment *1)
50 (approximately)
10.0
4.2 (see comment *2)
---
4.0
Nuts: hexagonal
Bolts: pan (crosshead)
Steel with a Bright Zinc plated finish
6.9
6.5(see comment *3)
Comments
Various Sets (see separate list) from one or more unknown Chinese makers. Most parts as Eitech/Construction but some others. *1 Mod.1 & finer for Motor/Gear Unit.. *2 Square holes in some RCEE sets. *3 6.1 & 7.4 also reported.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for POLYLONG [1a] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Polylong[2]
Manufacturer / Distributor
Unknown Chinese company
rcee GmbH, Germany
Info from the Metal Constructional Systems Database for POLYLONG [2] (Ref:PLY2)
as EITECH/CONSTRUCTION
China
known in 2010
Steel
M4
11.0
Nuts:
Bolts:
`
Comments
Parts like POLYLONG [1] but scaled up to match 11mm hole pitch. These parts are known from some HAPPY PEOPLE & possibly JOE-MO sets.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for POLYLONG [2] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Where there are photos and manuals of these sets then the systems to which they belong are listed separately on this website.
However there is also an instruction leaflet for an unidentified Polylong' type set below